How to use
２－３
How to use Menu Mode Operation
１）How to register menu
①When the power is “ON”, press the ten key switches to register
desired menu number.
・"Menu Number” is displayed on the menu display.
・You can register up to 99 menus.
e.g.) The menu number is 10.
Press “1” then “0” on the ten key switches.
②Press the menu setting switch more than 2 seconds.
・The buzzer is sounded and the mode enters a menu program
mode.
・“Menu Number” blinks on the menu display.
③Please configure desired settings.
■Setting temperature［Ｏｎｄｏ］
・“Ondo” is displayed on the timer display.
・“Preset Temperature” is displayed on the preset temperature display.
(Default setting: 180℃)
・Press the ten keys to set desired “Ondo (Temperature)”.
※Temperature setting range: from 100 to 220℃
e.g.) The preset temperature is 180℃.
Press “1”, “8”, then “0” on the ten key switches.
・Once the menu setting switch is pressed, you will be prompted to time settings.
Notification
・To modify details of registered menu, register again reference to “How to register
menu” from the step ①.
・If more than 1 minute passed without any operation, the display is returned to
the initial display.
To Next Page
Loading...