How to use
２－４ Other usage
■ＥＣＯ mode
・
When the ECO switch is pressed, the mode enters an ECO mode.
・
“ECO” is displayed on the timer display panel.
・Under the ECO mode, ECO lamp (Yellow) lights and the oil temperature
is maintained at -20℃ from the preset temperature. It is economical to
use in an idle time.
※To cancel, press the ECO switch again.
ECO mode is released.
※You can set automatic migration to an ECO mode with no operation more
than 20 minutes. (Contact our nearest sales branch or distributer of our
company for configuration changes.)
<No auto lifting>
①With “J”, the first cooking is conducted. The notification buzzer is sounded 5 seconds
before of the preset time, and the sound continues after the preset time.
②Take cooked food out from the oil tank.
③If you press the Start/Stop switch, the mode is migrated to “t-J”.
④With “t-J”, the system is in a standby condition. The notification buzzer is sounded
5 seconds before of the preset time, and the sound continues after the preset time.
⑤Put cooked food into the oil tank.
⑥If you press the Start/Stop switch, the mode is migrated to “2-J”.
⑦With “2-J”, the second cooking is conducted. The notification buzzer is sounded 5
seconds before of the preset time, and “End” is displayed on the timer display.
⑧Press the Start/Stop switch to finish cooking.
■Lard heating (Melting function)
・It is the function to melt gradually solid oil such as lard.
(When oil temperature is below 60℃, heating process is conducted for 8 minutes
with the cycle of ON for 5 seconds, OFF for 10 seconds, then ON 5 seconds….)
① Press the lard switch when the power is “ON”.
・Lard lamp (Yellow) lights during the heating process of lard.
※ No heating operation can be accepted while heating.
② Press the heating start switch.
・Heating lamp (Red) lights and heating process of lard starts.
・The timer display is down counting. (For 8 minutes)
③Once the heating process of lard (for 8 minutes) is completed,
the process is migrated to general heating.
Or when the oil temperature is over 60℃, the process is migrated
to general heating.
・Lard lamp (Yellow) is turned off.
※To cancel, press the heating start switch.
Lard lamp (Yellow) is turned off and heating process of lard is released.
※Lard heating can be used when oil temperature is below 60℃.
To Next Page
Loading...