【How to put solid oil into the oil tank】
※If you put the solid oil in the solidified state, remove the partition net from
the heater and never attach the sliding plate and fry basket.
・Put solid oil so as to it touches the heater entirely.
・Put solid oil up to the oil amount line.
If it is not enough after melting, pour them additionally.
※Agitate inside the tank from time to time because it takes longer to melt
for the part below the heater.
【Cautions to use solid oil】
・When you use solid oil such as lard, use lard heating (the melting function).
・Once lards are melted into the liquid state, flip up the heater and attach the
partition net after cooling down the heater completely before cooking.
※Make sure the heater is cooled down before attaching the partition net.
It is extremely dangerous to attach it when the heater is still hot.
■Extension of cooking
・For the extension of cooking, the cooking time is extended for 10
seconds when you press the extension switch.(Whenever you press
the extension switch, 10 seconds are added to the cooking time.)
・A 10-seconds cooking can be done even though no cooking process
is going on if the extension switch.
※During the extension, cooking can be down even if the temperature has
not reached at appropriate temperature.
■Melodies to notify the completion
・You can change the sound to notify the completion of cooking into the following
melodies:
To Next Page
Loading...