CARE AND CLEANING
Remove all of
the ice from
the ice bin
Remove the black
reservoir drain
plug
has been removed. If not repeat the clean cycle procedure.
ICE
CLEAN
OFF
Refer to your cleaning solution instructions to determine
the proper amount of cleaning solution to add based on
evaporator plate. Pour the cleaning
the fresh water
reservoir.
Splash shield
brackets
Pour cleaning solution slowly
onto the front edge of evaporator
plate behind the grid cutter.
Evaporator
plate
Grid cutter
Splash shield
Lift fascia door up to
access evaporator plate
Replace the splash shield if removed.
14
To Next Page
Loading...
