MASCAR TUAREG 525 - User Manual

Vor Inbetriebnahme
der Maschine die
Bedienungsanleitung
lesen

Summary

Section 2: Safety and Accident Prevention

2.1 Safety

Covers general safety responsibilities, hazards, and warning symbols.

2.2 General Safety Rules

Provides essential safety guidelines for operating and maintaining the machine.

2.3 Safety Signs (Pictograms)

Explains the meaning of various hazard and caution symbols on the machine.

Section 3: Transport and Handling

3.1 Transport and Handling

3.1.1 General Warnings

Section 4: Operating Instructions

4.1 Before Use

Checks and preparations required before operating the round baler.

4.1.1 Working Position

4.2 Hooking to the Tractor

Step-by-step instructions for safely connecting the baler to the tractor.

4.3 P.T.O. Shaft

Details safety precautions and maintenance for the Power Take-Off shaft.

4.5 Hydraulic Connection

4.6 Electric Installation

4.7 Switch Board

4.8 Twine Binding

Procedure for preparing the machine for twine bale binding.

4.9 Net Binding

Procedure for preparing the machine for net bale binding.

4.9.1 Rearmament of Knife Net Binding

4.10 Harvesting Roll (Pick-up)

4.11 Cutting Device

4.11.1 Replacement of Knives

Detailed steps for safely replacing the knives in the cutting device.

4.12 In Working

Sequence of operations for harvesting and pressing bales.

4.13 Flooding of the Machine

Procedure to follow if the machine becomes blocked or 'flooded'.

4.14 Stop of Baler

Essential steps for safely stopping the baler at the end of work.

4.15 Parking

4.17 Safety Device

Description and importance of various safety devices installed on the baler.

4.18 Controls and Test

Section 5: Instructions for Harvesting

5.1 General Instructions

Factors influencing baler performance and windrow preparation.

5.4 Starting

5.4.1 Starting to Harvest

Procedures for initiating the harvesting operation, including speed.

5.4.2 Unloading of Bale

Steps for safely unloading a completed bale after harvesting.

5.5 Stop of Baler

5.6 Parking

Section 6: Maintenance

6.1 Maintenance

General principles and importance of regular machine maintenance.

6.2 P.T.O. Shaft

6.3 Maintenance of Cutting System (TUAREG-CUT)

6.4 After the First 8 Working Hours

6.5 Every 8 Working Hours

6.7 After the First 50 Working Hours

6.9 Every 400 Working Hours

6.10 Lubrication

6.11 Stop of the Machine

6.13 Inconveniences and Remedies

Troubleshooting guide for common issues and their solutions.

MASCAR TUAREG 525 Specifications

General

Brand	MASCAR
Model	TUAREG 525
Category	Lawn and Garden Equipment
Language	English