Need help?Do you have a question about the Mase Generators IS 6.0 and is the answer not in the manual?
General| Continuous power (COP) | 5.4 kVA |
|---|---|
| Voltage | 230V |
| Frequency | 50 Hz |
| Fuel | Diesel |
| Starting system | Electric |
| Protection | IP23 |
| Dimensions (LxWxH) | 960 x 560 x 660 mm |
| Phase | Single-phase |
| Rated power (LTP) | 6 kVA |
| Engine Type | 4-stroke |
Defines the required space, airflow, and acoustic isolation for generator installation.
Guides on securely mounting the unit, including base installation and drilling for vibration absorption.
Details the internal cooling mechanism and air intake needs for combustion.
Explains the two main methods for drawing sea water into the cooling system.
Illustrates the water circuit setup for generators placed above the waterline.
Shows the water circuit configuration for generators positioned below the waterline.
Lists and describes key parts of the cooling water circuit, like filters and valves.
Covers the essential elements and considerations for the generator's fuel supply system.
Provides instructions for connecting the 12V start-up battery, including cable specs and polarity.
Details wiring the control panel, using terminal boards, color codes, and mounting.
Explains parallel and serial wiring for 110/120V and 220/240V AC output configurations.
Advises on installing a switch for seamless transfer between generator and mains power.
To Next Page
