EasyManua.ls Logo

Maserati Coupe - Headlights; Angle Adjustment

Maserati Coupe
224 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
136
Headlights
Headlights
Headlight beam aiming
(excluding vehicles equipped
with xenon headlights)
It is essential that the headlights are
adjusted properly, not only for the
comfort and safety of the driver but
also for all road users. Moreover,
correct beam aiming is an essential
requirement of traffic law.
To ensure that the driver and all other
users benefit from the best visibility
conditions when travelling with the
lights on, the car must feature a correct
beam setting.
Consult your Authorized Maserati
Dealer for a check and any adjustments
required.
Angle adjustment
When the car is loaded, it tilts to the
back and the head light beams are
raised higher.
In this case, they must be correctly re-
positioned using the electric adjuster
found to the left of the steering wheel.
The switch A works only with the
ignition key in the MAR position. It has
4 settings to choose from, on the basis
of the load being transported and
assuming that the fuel tank is full.
Dipped 0 - One or two people in the
front seats
Dipped 1 - One person (the driver) +
load distributed uniformly
in the luggage
compartment
Dipped 2 - Four persons
Dipped 3 - Four persons + load
distributed uniformly in
the luggage compartment.
WARNING: Adjust the height of the
light beam each time there is a change
in the weight of the load transported.
A

Table of Contents