Level (SPL) and exceptional dynamic
sound quality.
The speakers are tuned for maximum
efficiency and compatible with the
amplifier output stage ensuring best
updated surround sound processing.
Logic 7
®
multichannel surround sound
technology delivers an immersive,
accurate sound stage throughout the
passenger compartment.
This surround effect is available from
any audio source - AM/FM/Satellite
Radio or AUX and USB input; and is
activated through the MTC+ System
controls. By selecting “Audio
Surround”, you can activate the Logic
7
®
multichannel surround-sound
technology in your vehicle. All
information on the current
operational mode can be found in the
specific booklet visible on the MTC+
screen.
When in “Audio Surround” mode,
balance is set automatically. Fader
control is available in surround mode
but it should be set to the center
position for optimal surround
performance.
MTC+ Settings
Customer Programmable
Features
The MTC+ System uses a combination
of keys able to access and change the
customer programmable features.
Access programmable features using
touch screen keys positioned on the
lower part of the MTC+ display,
centrally of the dashboard, or manual
controls on central console (refer to
“Infotelematic System” in this section).
Turn the tune/scroll knob to scroll
through menus and change settings on
MTC+ display, press the enter upper
button to confirm the selection.
NOTE:
• For further details refer to the
“Maserati Touch Control Plus
(MTC+)” guide.
• All settings must be edited with
ignition device set to RUN position.
To display the programmable features
menu on MTC+:
• touch the “Settings” soft-key, if
available, on main menu toolbar;
• or touch
to view all available
applications and then select
“Settings”;
Dashboard Instruments and Controls
4
190
To Next Page
Loading...
