Parking Brake Function
Applying the Parking Brake - To lock the parking brake,
release the ground speed pedals (A, Figure 2), fully de-
press the brake pedal (B), pull UP on the parking brake
knob (C), and then release brake pedal.
Releasing the Parking Brake - To release the parking
brake, fully depress the brake pedal (B, Figure 2) and
push the parking brake knob (C) DOWN.
12
Cruise Control Operation
TO ENGAGE:
1. Pull up on the cruise control knob (D, Figure 2).
2. Depress the forward ground speed pedal (A).
3. Lift up the cruise control knob (D) when desired speed
is reached. The cruise control will lock in one of its six
locking positions.
TO DISENGAGE:
1. Depress the brake pedal (B, Figure 2).
OR
2. Depress the forward ground speed pedal (A).
Hourmeter
The hourmeter (E, Figure 2) measures the number of hours
the key has been in the RUN position. The hourmeter
will ash an initial oil change indicator at 5 hours, and a
lubrication reminder every 50 hours. These reminders
display for approximately two hours and will automatically
reset themselves.
NOTICE: The hourmeter will register the passage of time
when the key is in the RUN position, even if the engine is
not running. The hourmeter has a self contained power
source so the total hours are always visible.
B
C
A
D
E
Figure 2
To Next Page
Loading...
Need help?
General
