MASSEY FERGUSON 4600 Series - Lubrication Fill and Drain Locations

After first 50 hours
X Inspect and adjust the tie rod end. If adjustment or service is necessary, see
your dealer.
X Inspect and correct the tire air pressure.
X Inspect and adjust the wheel bolts and nuts.
X Inspect the power steering hose, replace if necessary.
X Inspect the fuel hose, replace if necessary.
X Inspect the electrical wiring, replace if necessary.
X Inspect the lamps, replace if necessary.
X Inspect the warning device, replace if necessary.
X Inspect the air conditioner belt, replace if necessary.
X Clean the air conditioner condenser.
1.4.3 Lubrication fill and drain locations
Grease fittings
Fill location
Drain location
Oil level check location
Ref Description Type
1 Engine Engine oil
2 Radiator overflow
reservoir
Coolant
3 Fuel tank Diesel fuel
4 Transmission
housing
Hydraulic oil
5 Front axle, four-
wheel drive only
Hydraulic oil
6 Axle pivots Grease
7 Front spindles Grease
8 Ball joint Grease
9 Front brake pivots Grease
10 Brake arm pivots Grease
11 Parking brake
pivots
Grease
12 Lift rod Grease
13 Top link Grease
Fig. 7
1. Introduction
4608 / 4609 / 4610 Service Manual 1-19
4283492M3