MASSEY FERGUSON 4245 User Manual

4200 Series Cab Tractor
Operator Instruction Book
4200 cab - M2
WEO
1
MF and MASSEY FERGUSON are registered trademarks of AGCO Corporation or one of its subsidiaries.
Tractor Models Applicable:
For cab tractor models:
4225, 4235, 4245, 4255, 4260, 4270.
Serial numbers applicable:
K 27456 onwards.
Manufactured from 2001 onwards.
Contents - Page
General Information - 3
Tractor identification.
Introduction.
Warranty, pre-delivery and installation on the farm.
Safety notes.
Safety decals.
Controls and Instruments - 21
Controls.
Instruments.
Operation - 45
Starting.
Running-in.
Operating the tractor.
Maintenance and Adjustment - 99
Maintenance chart.
Recommended lubricants.
Servicing the tractor:
Greasing, checking levels and changing oil.
Adjustments - axles, brakes and wheels.
Replacements - fuses, bulbs and battery.
Fuel storage.
Accessories - 167
Specification - 173
Alphabetical Index - 191
Published by:
AGCO Limited,
Banner Lane,
Coventry,
England CV4 9GF
August 2002
1857 230 M2
Issue 2
© AGCO Limited 2001
TL 3686

MASSEY FERGUSON 4245 Specifications

General

Drive	4WD
PTO Speed	540/1000 rpm
Hydraulic System	Open center
Transmission	8-speed
Lift Capacity	3, 200 kg

Summary

Tractor Identification

General Information

Safety Overview

Covers general safety principles, operator responsibilities, and regulatory compliance.

Safety Notes

Danger, Warning, and Caution

Defines and explains DANGER, WARNING, and CAUTION safety terms and symbols.

Protective Structures

Information on ROPS, seat belts, and cab safety features for overturn protection.

Downhill and Slope Operation

Safe practices for operating on slopes, including gear selection and turning.

To Avoid Rear Overturns

Precautions against rear overturns, including hitching points and counterweights.

Safety Notes

Safety Notes

Use all Available Protective and Safety Devices

Ensuring all protective devices, guards, and safety signs are in place and functional.

Servicing the Tractor

Starting Procedures

General Operating Hazards

Implements and Attachments

Battery Safety

Check the Equipment

Pre-operation checks for tractor systems, safety devices, and overall condition.

Risk of Overturning

Recommendations for ROPS/seat belts and actions during an overturn.

To Avoid Side Overturns

Tips for preventing side overturns, including speed, turns, and track settings.