MASSEY FERGUSON 4225 User Manual

4200 Series Cab Tractor
Operator Instruction Book
4200 cab - M2
WEO
1
MF and MASSEY FERGUSON are registered trademarks of AGCO Corporation or one of its subsidiaries.
Tractor Models Applicable:
For cab tractor models:
4225, 4235, 4245, 4255, 4260, 4270.
Serial numbers applicable:
K 27456 onwards.
Manufactured from 2001 onwards.
Contents - Page
General Information - 3
Tractor identification.
Introduction.
Warranty, pre-delivery and installation on the farm.
Safety notes.
Safety decals.
Controls and Instruments - 21
Controls.
Instruments.
Operation - 45
Starting.
Running-in.
Operating the tractor.
Maintenance and Adjustment - 99
Maintenance chart.
Recommended lubricants.
Servicing the tractor:
Greasing, checking levels and changing oil.
Adjustments - axles, brakes and wheels.
Replacements - fuses, bulbs and battery.
Fuel storage.
Accessories - 167
Specification - 173
Alphabetical Index - 191
Published by:
AGCO Limited,
Banner Lane,
Coventry,
England CV4 9GF
August 2002
1857 230 M2
Issue 2
© AGCO Limited 2001
TL 3686

MASSEY FERGUSON 4225 Specifications

General

Cylinders	4
Fuel Type	Diesel
Drive	4WD
PTO Speed	540/1000 rpm
Hydraulic Remotes	2

Summary

Tractor Identification

Serial Numbers

Crucial for dealer communication; locate and record tractor serial numbers.

Introduction, Warranty and Safety Notes

Introduction to Tractor Operation

Guidance on safe operation, maintenance, and using approved parts and accessories.

Pre-delivery, Installation and Warranty

Outlines dealer responsibilities for pre-delivery checks, installation, and warranty coverage details.

Safety Overview

Highlights the importance of safety, operator responsibility, and adherence to manual instructions.

Regulatory Compliance

Tractor conformity with EU Electromagnetic Compatibility and noise level requirements.

Safety Notes

Safety Fundamentals and Symbols

Explains safety alert symbols, general safety principles, and hazard classifications.

Operational Safety Preparations

Covers decals, safety programs, protective structures, cab, pre-operation checks, and equipment knowledge.

Maintenance, Starting, and Work Safety

Details safety during servicing, cleaning, starting, and general work practices.

Operating Hazards and Overturns

Addresses risks from bystanders, overturning, slopes, and general operating dangers.

Implements, Towing, and Road Safety

Guidelines for using implements, towing, road transport, rules of the road, and post-operation.

Safety Decals and Locations

Identifies important safety decals and their specific placement on the tractor.