MASSEY FERGUSON 4260 User Manual

4200 Series Cab Tractor
Operator Instruction Book
4200 cab - M2
WEO
1
MF and MASSEY FERGUSON are registered trademarks of AGCO Corporation or one of its subsidiaries.
Tractor Models Applicable:
For cab tractor models:
4225, 4235, 4245, 4255, 4260, 4270.
Serial numbers applicable:
K 27456 onwards.
Manufactured from 2001 onwards.
Contents - Page
General Information - 3
Tractor identification.
Introduction.
Warranty, pre-delivery and installation on the farm.
Safety notes.
Safety decals.
Controls and Instruments - 21
Controls.
Instruments.
Operation - 45
Starting.
Running-in.
Operating the tractor.
Maintenance and Adjustment - 99
Maintenance chart.
Recommended lubricants.
Servicing the tractor:
Greasing, checking levels and changing oil.
Adjustments - axles, brakes and wheels.
Replacements - fuses, bulbs and battery.
Fuel storage.
Accessories - 167
Specification - 173
Alphabetical Index - 191
Published by:
AGCO Limited,
Banner Lane,
Coventry,
England CV4 9GF
August 2002
1857 230 M2
Issue 2
© AGCO Limited 2001
TL 3686

MASSEY FERGUSON 4260 Specifications

General

Type	Tractor
Engine	Perkins
Fuel	diesel
Cylinders	4
Hydraulic System	Open center
Hydraulic Remotes	2
Drive	4WD

Summary

Tractor Identification

Serial Number Identification

Observing and quoting tractor serial numbers for communication with the dealer.

Introduction and Warranty

General Introduction and Dealer Services

Guidance on tractor operation, using genuine parts, and dealer support.

Warranty Procedures and Conditions

Details on warranty coverage, claim procedures, and common exclusions.

Service After Warranty and Location

Recommendations for post-warranty service and transferring commitments.

Safety Notes

Safety Fundamentals and Hazard Awareness

Importance of safety, alert symbols, hazard definitions, and operator responsibilities.

Protective Structures and Equipment Safety

ROPS, seat belts, cab safety, and personal protective equipment.

Operational Safety: Checks, Starting, and Servicing

Daily checks, safe starting, servicing precautions, and component safety.

Risk Prevention: Overturns, Slopes, and Roads

Preventing overturns, slope safety, towing, road transport, and road rules.

General Hazards and Safety Decals

PTO, implements, chemicals, visibility, general hazards, and decal locations.