MASSEY FERGUSON GC1715 Installation Manual

30. Un-bolt and remove the SMV sign from the 2-post ROPS.
31. Position the SMV sign mount against the left rear tractor fender and mark the location of
the two holes that are in the SMV sign bracket. Line the sign up with the bottom of the fender
as shown.
32. Drill two 1/4" holes through the fender.
June 2021© Massey GC1705 ROPS Cab Installation Manual

MASSEY FERGUSON GC1715 Specifications

General

Engine Type	3-cylinder diesel
Transmission	Hydrostatic
Fuel Capacity	6.6 gallons
Drive System	4WD
Tire Options	Turf, Industrial