1 - 8
INTRODUCTION
Tractor identification and technical specifications
2-3 Engine specifications
SHERPA SPECIFICATIONS MF 2210 MF 2225
With tyres: Front 280/70-R20 300/70-R20
- Rear 14.9 - R28 420/70-R28
WEIGHTS
I
n running order, with cab without ballast
kg 2430 2500
with front / rear ballast kg 2960 3030
DIMENSIONS
A - Height at cab mm 2354 2385
B - Min/max width mm 1732/2244 1777/2286
C - Ground clearance mm 335 345
D - Wheelbase mm 1996 2123
E - Max length (with 2 ballasts) mm 3904 3904
F - Tracks: Front min/max mm 1325/1675 1325/1675
- Rear min/max mm 1354/1866 1354/1866
ENGINE MF 2210 MF 2225 MF 2235
Type: Perkins diesel, with direct injection
Model 903.27 1004.40 1004.42
Aspiration Natural Natural Natural
Number of cylinders 3 4 4
Bore mm 95 100 103
Stroke mm 127 127 127
Swept volume liters 2.7 3.99 4.233
Compression ratio 17.25:1 17.25:1 17.25:1
Power(DIN 700200) HP/kW 54/39.7 66/48.6 78/57
Max. speed under load RPM 2300 2200 2200
Max. speed with no load RPM 2475 2375 2310
Max. torque (DIN 70020) Nm 193.1 - 284
Max. torque speed RPM 1350 - 1400
Idling rate RPM 750 750 750
VALVE GEAR
Type Overhead valves controlled by tappets
tappet gap with engine cold:
- Intake (mm) 0.20 0.20 0.20
- Exhaust (mm) 0.45 0.45 0.45
FUEL SYSTEM
Fuel pump AC-DELCO AC-DELCO AC-DELCO
Injection pump ROTARY LUCAS DP 202 ROTARY LUCAS DP 202 ROTARY LUCAS DP 202
Filter on injection pump delivery CAV CAV CAV
Injection order 1-2-3 1-3-4-2 1-3-4-2
Injectors PERKINS PERKINS PERKINS
Injector pressure setting (bar) 296 296 290
Cold starting device Thermostarter
Air filter Dry, with two elements removable for maintenance
Find manuals at https://best-manuals.com
To Next Page
Loading...
