1 - 9
INTRODUCTION
Tractor identification and technical specifications
2-4 Clutch specifications
Manufacturer LX (OX)
Type Single-plate (with hydraulic PTO)
Double-plate (with mechanical PTO)
Dimensions 11" (280 mm.) Single-plate (MF 2210-2225)
11" (245/280 mm.) Double-plate (MF 2210-2225)
12" (304.8 mm.) Single-plate (MF 2235)
12"/11 (304.8/880 mm.) Double-plate (MF 2235)
Material Gearshift plate with 5 cerametallic plaques
Organic PTO plate
2-5 Transmission specifications
Manufacturer Massey Ferguson
Gearbox
Speeds Four synchronized speeds with infinitely meshed
helical gears
Type of reduction ranges Three forward ranges (Slow-Normal-Fast)
Creeper (7.333 reduction).
Reverse shuttle Synchronized on gearbox input
Number of speeds 12 forward and 12 reverse speeds with standard gearbox
15 forward and 15 reverse speeds with optional
24 forward and 24 reverse speeds with creeper
30 forward and 30 reverse speeds with optional gearbox
48/60 forward and 48/60 reverse speeds with Hi-Lo
Rear axle
Bevel gear pair 9/37 with helical toothing, Gleason type (MF 2210)
11/41 with helical toothing, Gleason type (MF 2225-2235)
Final reduction Straight-tooth type with 10/51 or 11/49 ratios (MF 2210)
or 11/62 ratio (MF 2225-2235)
Total reduction ratio 23.23 or 20.29
Type of Differential With two planetaries
Differential lock With mechanical or electrohydraulic control,
mechanically engaged
Disengaged by means of the brakes (electrohydraulic control)
Rear brakes
Type Oil cooled multiple-plate type
Number of friction disks 8 (4 each side)
Friction disk material Graphitized resin
Disk diameter 166x110 mm
Total braking area 1900 cm
2
Diameter of braking cylinder 25.4 mm
Parking brake Mechanical, engaged by a hand lever
Rear brakes (4WD axle)
Type Oil colled multiple plate
Number of friction disks 8 (2 each side)
Friction disk material Graphitized resin
Disk diameter 143x91 mm
Total braking area 764.5 cm
2
To Next Page
Loading...
