1. Regularly clean the external dust of the controller, which is conducive to heat dissipation;
2. Regularly check the controller plug to prevent the controller from being invalid due to virtual connection;
3. After the controller is sprayed with water, clean the controller lead connector with clean water or alcohol in time to avoid
oxidation and corrosion.
●4-1-3 Wheel & Tire’s Maintenance
The best adhesion of new tires can be demonstrated after 100KM, so it should be run in at an appropriate driving speed and
driving mode to ensure driving safety and extend tire life.
Proper tire pressure can maintain the best driving stability, driving comfort, and tires are durable. The tire pressure should be
checked frequently, and if necessary, the tire pressure can be adjusted within the tire calibration pressure.
Reference standard for tire pressure under cold conditions
Note: Before driving, check the tires for cuts, nails or other sharp objects embedded. Check whether the rim is dented or
deformed. If you replace a damaged tire or a leaky inner tube, please contact your local service station.
To Next Page
Loading...