EasyManua.ls Logo

Massimo MGC - Brake Inspection and Adjustment

Massimo MGC
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
carry it with the car. If you really want to carry it, you should pack the charger with shock-absorbing materials and place it in
the tool box on the car.
4-1-6 Inspection and adjustment of the brake
Good braking performance is an important guarantee for your driving safety.
The new vehicle brake system is all adjusted. However due to the wear of the brake pads, the loosening of the screws or
other bad driving habits, it will cause extended braking distance or even brake failure. Under normal driving conditions, Pls
check the degree of wear and thickness of the brake shoes, whether the degree of wear on both sides is balanced, whether
the return is free, etc. per 2000km, if any abnormal situation is found, it shall be dealt with immediately.
When it is found that the braking distance is extended and the brake pads are lightly worn, the brake system can be
simply adjusted as follows:
PIC 4-1 brake adjusting nut