Fuse box, Relay (under the seat of driver) Relay Display
1-Horn relay. 2-Low beam relay.
3-High beam relay. 4-Flashing relay
Fuse Display
IV、check before drive
1 Check to make sure your engine isn't leaking, as oil, cooling fluid, fuel, and lube.
2．Check the height of engine oil, brake liquid and cooling liquid, if necessary, add
some.
3．Check the air pressure in tire.
4. Check the function of safety belt.
5. Check whether steering transmission organization has been loosened.
6. Check whether engine bracket, bolts, and bolts of transmission system and running
system have loosened or fallen off.
7. When starting engine, listen and check whether there is any abnormal noise, and
observe whether each instrument is normal.
8. Check whether steering is flexible and reliable; check brake free travel
function(including parking brake).
9. Check whether lighting system (steering light, brake light, warning light, small
light, dipped headlight, high beam and so on) is complete and effective.
10. Check whether vehicle box overturn roof and self-saving winch could work
To Next Page
Loading...
