our company).
(8) Abnormal abrasions and damages caused by wrong using gasoline,
lubricating oil, coolant and brake liquid.
(9) Feeling phenomenon which could not influence mechanical performance,
such as: noise, vibration, heat and so on.
(10) Damages caused by that you do not check and maintain vehicle periodically
by our requirements.
II、Technical parameters
(I)、Common technical data
1、Mass parameters(kg)
Mass of whole equipments(not including driver)： 540Kg
Front shaft： 240Kg
Rear shaft： 300Kg
2、Dimension parameter(mm)
Total length×total width×total height:2630×1230×1890
Minimal clearance apart from ground： 183
Wheelbase： 1800
Tread： front wheel：1058 rear wheel： 1070
Approach angle(°)：60
Removed angle(°)：85
(II)、Using data
1、High running speed(km/h)：53
2、Minimum turn around semi-diameter(m)： 4.2
3、Brake performance (No-load brake distance m)。
When V
０
=20km/h：2.5
When V
０
=30km/h：5.4
When V
０
=40km/h：9.5
When V
０
=50km/h：14.6
4、0—50Km/h accelerating time（S）： 15
Time of start running(the used time from stop to run 200m distance) (S): ≤18s
Accelerating time(the used time run 200m at 30km/h) (S): ≤14s
5. Oil consumption for 100 kilometers (L)：6（when speed is 40km/h）
6. Exhaust：
Reach Euro II exhaust standard.
7. Limit load of good box： 300Kg
(III)、Engine
Type：VM173MN
To Next Page
Loading...
