2. Accelerate and decelerate
It is necessary to avoid sudden and frequent acceleration and deceleration
and keep running in even speed in running-in period.
3. Heating engine before running
In running-in period, it is necessary to run at idling speed for 3-5 minutes
after starting engine to pre-heat engine, then start running after lubricating oil
flows on each friction surface.
4. Note engine cooling
In running-in period, it is necessary to note water temperature in engine to
avoid running in low temperature for long time and in high temperature
without water, this will strengthen abrasion and drag cylinder.
5. Check the loosing situation on each linking part of all bolts usually
For fastening bolts on each part of new vehicle are easy to loosen, it is
necessary to note the fixed situation of each bolt, especially the bolts of
transmission organization and fixed equipment.
6. First maintenance of vehicle
In running-in period, after running for 1000km, it is necessary to complete
first maintenance, maintenance details could refer to “Maintenance and
repair”.
警告：首次保养对发挥农夫车最好性能，延长其使用寿命和确保安全都非
VII、Maintenance and repair
1、First maintenance item table
To Next Page
Loading...
