Massimo MSU 300 - Page 6

6
suspension。
5. Wheel alignment parameter：
Front wheel camber： 1°±45′
Main pin K.P.I： 13°
Main pin castor： 4±1°
Front toe-in： 2—5mm
6. Tire：
Front wheel： Front wheel type 25×8.00—12. Air charging pressure：
148Kpa (21PSI)
Rear wheel：Tire type 25×10.00—12 Air charging pressure：
197Kpa (28PSI)
7. Steering organization：
Adopt gear rack type redirector, total circle number of steering plate：3.75；
total swing angle of steering wheel：70°.
The maximum left turning angle of left wheel: 35°.
The maximum right turning angle of right wheel: 35°.
8. Arrester：
Running arrester adopts front and rear placement dual-pipeline hydraulic
pressure brake system, front and rear wheels adopt drum type arrester. And parking
arrester adopts mechanical transmission organization to work on rear wheels.
9. Goods box overturn roof and self-saving winch：
Good box could adopt overturn roof structure and equip self-saving winch
to drag itself if relapsing into loose sludge.
(V)、Electric apparatuses
1. Pipeline system： pipeline system adopts single-line system，Minus ground
strap， pipeline voltage is 12V。
2. Generator：type is FM169，rated power is 300W。
3. Storage cell：voltage is 12V，capacity is 24A·h。
4. Starting engine type：12V forever magnetic DC electric engine。