Users’ Guide for Earth Ground Resistance Tester
Description
MAX： Maximum
MIN： Minimum
AV G ： Average
REL： Relative measurement
READ： Data reading
MEMO： Data is being put into a memory
USED： There are data in memories.
2POLE： Bi-pole method is being used for measurement of resistance.
3POLE： Ti-pole method is being used for measurement of resistance.
V： Volt(voltage)
KΩ： Ohm(resistance)
： Auto power-off has been started with the symbol on
： Battery is low with the symbol on
： For socket identification
： Alternating current
： For warnings and cautions
-9-
To Next Page
Loading...
