Master & Dynamic MW50+ Quick Start

Hold in position for 2 or
more seconds, white light
will pulse when headphone
is in pairing mode. Release.
Pairing
Connected
Pairing
Access Bluetooth settings
on your source device.
Locate MW50 and connect.
A solid light indicates you
are connected.
If no connection is made after 1 minute,
the headphone will enter deep-sleep
mode. Cycle power switch to awaken.
•
•
Changing Ear Pads
To remove, grip leather ear pad and
gently pull away from ear cup. Magnets
will release.
To attach, line up holes on back of ear
pads with locator pins on ear cups. The
magnets will help pull and lock the ear
pads into place.
Over-Ear
On-Ear
Locator Pin

Master & Dynamic MW50+ Specifications

General

Control type	Buttons
Headset type	Binaural
Product type	Headphones
On/off switch	Yes
Product color	Brown
Wearing style	Head-band
Operating keys	Volume +, Volume -
Volume control	Button
Recommended usage	Music
Microphone type	Built-in
3.5 mm connector	-
Connectivity technology	Wireless