Master audio TP2400 - General Features

Amate Electroacústica, s.l. would like to thank you for the con-
dence you have placed in our products. We are sure they will give
you complete satisfaction. All MASTER AUDIO products have
been manufactured under strict Quality Controls and have sur-
passed rigorous performance and fatigue testing to guarantee
perfect operation even under extreme conditions.
1 - GENERAL FEATURES
2 - CONTROLS (Front panel)
- Controls.
- Indicators.
3 - CONNECTIONS (Rear panel)
- Signal Inputs.
- Speakers.
- Power supply.
- Ventilation.
4 - OPERATION
- Installation.
- Protection systems.
- Maintenance.
5 - TECHNICAL FEATURES
6 - CERTIFÍCATE OF WARRANTY
To obtain maximum performance and guaranteed operation,
please read this Instruction Manual carefully before making any
connection or putting the apparatus into operation. Ask your
supplier if you require any further information not included in this
Manual.
The TP2400 2.1 SYSTEM has been designed to cover a wide
range of general applications in music clubs. Its unique design
includes the most demanded features of professional P.A. sys-
tems, such as: bi-amplication, active signal processing, con-
gurable lters, soft-start circuit, anti-clip limiters and multiple
protection and safety systems.
- BI-AMPLIFICATION: The TP2400 incorporates a stereo am-
plier for the mid-high range (Left-Right) and a more powerful
Mono amplier unit for low frequencies (Subwoofer). Each ampli-
er is controlled by its own independent volume control.
- ACTIVE FILTERING: three adjustable built-in lters allow the
user to select the frequency range to be reproduced by the
speaker systems connected to each channel. The response is
therefore optimized for each speaker system.
- The SUBWOOFER section has also a BOOST switch, which
applies an increment of 6dB at 50Hz, and a subsonic lter (HPF)
of 18dB/oct. A very useful option when the response of the
subwoofer needs to be reinforced, without limiting the maximum
admissible power.
- Also in the subwoofer section, a PHASE (0-180) switch is
available to electronically invert the phase of the subwoofer, and
nd the best acoustical alignment with the mid-high satellite
speakers.
- Three adjustable LIMITERS (one per channel), allow to adjust
the maximum power delivered by each of the amplier chan-
nels. This allows adjusting the power delivered to the connected
speaker systems, either to match it with their maximum admis-
sible power or simply to not overpass the maximum acoustical
pressure needed in the installation.
- The unique SOFT START circuit in the power switch avoids
high inrush currents at power up by keeping the amplier in
MUTE for a few seconds and progressively activating the output
signal, avoiding any noise or sudden shock during the power up
phase.
- Each channel is equipped with a CLIP LIMITER, which pre-
vents the loudspeaker systems from reproducing distortion due
to amplier saturation at maximum power.
- The amplier is tted with extended PROTECTION SYSTEMS,
needed to guarantee a safe operation, even under temporary ab-
normal situations. The amplier is protected against shortcircuit,
presence of DC at the speaker outputs, overtemperature, etc.
Each protection is independent for each power module, thanks
to the amplier’s modular design. An automatic reset Breaker
fully protects the unit in case of continuous overload. Also, a CE
compliant mains lter improves the immunity to parasitic signals
in the mains.
- The TP2400 is a COMPACT AND VERSATILE unit which
can be easily congured for any combination of speakers and
subwoofers, getting the maximum performance of them, achie-
ving a sound quality equal to more complex and expensive sys-
tems.
GENERAL FEATURES
ENGLISH02