Master Chef 043-0295-6 User Manual (English)

Questions and Answers:

W
williamsadamAug 2, 2025
What to do if ICE FULL and ADD WATER indicators light up simultaneously on Master Chef Ice Maker?
- R
  Robert MartinezAug 2, 2025
  If the ICE FULL and ADD WATER indicators light up together on your Master Chef Ice Maker, it could be due to an electrical power surge, air or blockage in the lines, or the water tank's inability to detect the water level. Try these steps: Turn off the ice maker and unplug it. Refill the water if needed and plug it back in. Inspect the parts. Remove the drain cap at the back to drain a bit of water, then replace the cap and restart. Also, check for ice blocking the ice pusher; if so, turn off the ice maker, let the ice melt, and restart it.
W
William SilvaAug 7, 2025
Why is the ADD WATER light on my Master Chef Ice Maker?
- S
  Scott KirkAug 7, 2025
  The ADD WATER indicator light turns on when the water level is low or there is no water in your Master Chef Ice Maker. To resolve this, simply add water, and the ice maker should resume operating automatically.
M
masonericaAug 12, 2025
What to do if my Master Chef 043-0295-6 is not operating?
- M
  mariorobertsAug 13, 2025
  If your Master Chef Ice Maker isn't operating, ensure it's properly plugged into a standard 110/120 V 60 Hz power source. Also, make sure the ambient temperature is below 32°C (90°F) and that you're using cold water in the reservoir. High ambient or water temperatures can prevent the unit from working.
D
Debbie GardnerAug 17, 2025
What to do if ICE FULL indicator is on in Master Chef 043-0295-6 Ice Maker?
- R
  richvincentAug 17, 2025
  If the ICE FULL indicator light is on, it means that the ice basket is full. Remove ice from the ice storage basket to make more in your Master Chef Ice Maker.
T
Thomas BanksAug 22, 2025
How to fix ice blockage in Master Chef 043-0295-6?
- J
  Julie ClarkeAug 22, 2025
  If you have ice blockage or no ice is being made in your Master Chef Ice Maker, it might be taking too long to make ice. Turn off the machine and let the ice block melt. Then, restart the machine. Alternatively, you can change the size selector to small ice cubes.
S
shernandezAug 27, 2025
Why is there no indication on the control panel of my Master Chef 043-0295-6 Ice Maker?
- M
  Miguel LloydAug 27, 2025
  If there is no display on the control panel of your Master Chef Ice Maker, the plug may be disconnected. Check that the plug is properly inserted into the electrical outlet.