Master Chef G32008 - Assembly Step 11: Electrode and Regulator

17
BC
CE
AssEMBLY instRUCtions
11
A
B
BC
CE
Attach the main burner
electrode wire (BC) to
the ignitor (CE). Make sure
that the electrode wire (BC)
is pushed in rmly.
CA
BA
BB
BB
CB
Position Valves (CB) into Burner
Tubes (BB) before assembling.
YOU WILL NEED:
76
4
X 4
9
X 4
ATTENTION: YOU WILL NEED TWO PEOPLE FOR THIS STEP.
IMPORTANT:
Position regulator
(CC) on the inside of
the cart.
CC
CC