Assembly
and
adjustments
(continued)
Sawdust collection port
(Fig. 9 and 10)
This scroll saw allows a hose or vacuum accessory (not provided)
to be connected to the dust chute (1) at the front of the saw and to
the dust chute (2) under the rotary tool table (30, if installed.
If excessive sawdust buildup occurs inside the base, use a wet/dry
vacuum cleaner or manually remove sawdust. This will keep your
saw cutting efficiently.
Adjusting the dust blower/light (Fig. 11)
For best results, the dust blower tube (1) should be adjusted to
direct air and light at the blade and workpiece.
240-0041 (888)315-3080 13
To Next Page
Loading...
