To Next PageTo Next PageWhy does my Master-force 240-0021 blade bind, jam, or burn wood?
If the Master-force Saw blade binds, jams, or burns wood, it could be due to a dull, warped, or improper blade, or improper operation. Try replacing or sharpening the blade, ensuring you use the correct type.
Why is the angle of cut inaccurate on my Master-force 240-0021 Saw?
If the angle of cut on your Master-force Saw is inaccurate, it might be because the miter table is unlocked, or there's too much sawdust under the table. Ensure the miter-lock knob is engaged and vacuum or blow out any accumulated dust, while wearing eye protection.
Why does my Master-force 240-0021 vibrate or shake?
If your Master-force Saw vibrates or shakes, it could be due to a damaged or loosened saw blade. Replace the blade if damaged, or tighten the arbor bolt if it's loose.
What to do if the brush sparks excessively on my Master-force 240-0021?
If the brush sparks excessively when the switch is released on your Master-force Saw, the brush may be worn or damaged. Replace the brushes referring to the MAINTENANCE chapter.
General| Brand | Master-force |
|---|---|
| Model | 240-0021 |
| Category | Saw |
| Language | English |
Indicates reading the manual and general safety precautions.
Symbols for hearing, inhalation, eye, and hand protection.
Symbols for rain exposure, hand safety, hot surfaces, and laser radiation.
Covers guards, clean area, hazardous environments, and child safety.
Guidelines on grounding, wet conditions, extension cords, and cord protection.
Details on PPE, tool handling, maintenance, and accessories.
Specifies that repairs must be performed by authorized service centers.
Instructions for checking parts, guards, and blade condition before use.
Covers blade use, maintenance, dust collection, and proper tool operation.
Advice on keeping hands clear of the blade path and proper workpiece positioning.
Guidance on blade condition, operation, lubrication, and general tool care.
Instructions for safe use of plugs, outlets, and avoiding contact with grounded surfaces.
Explanation of double insulation and ensuring correct voltage supply.
Warnings about rain, wet conditions, GFCI use, and cord inspection.
Warnings regarding direct eye exposure and potential hazards from laser use.
Guidelines on aiming, using sturdy surfaces, activation, and maintenance of the laser.
Information about the warning label affixed to the tool indicating laser light location.
Details the saw's design for specific cuts and materials, including limitations.
Defines key terms and components used in operating the miter saw.
Lists all included parts with their quantities for unpacking and verification.
Identifies the necessary tools required for assembly and adjustments.
Details the saw's motor, blade, safety features like electric brake, LED light, and laser.
Guidance on safely unpacking the heavy saw and checking for shipping damage.
Instructions for safely lifting and moving the miter saw, emphasizing proper grip and balance.
Steps for securely mounting the saw to a workbench for stable operation.
Details on connecting dust extraction and storing the saw blade wrench.
Explanation of how to use adjustment levers for fences and support arms.
Procedure for locking and unlocking the cutting head at desired bevel angles.
Instructions on how to set and lock the bevel angle, with and without detents.
How to adjust and lock the miter table, including overriding common angle detents.
Steps for setting miter angles using detents or the miter scale.
Guide for setting the depth stop for full-depth or non-through cuts (grooves).
Instructions on how to operate the LED work light for improved visibility.
Steps for activating and aligning the laser guide for accurate cuts.
Procedure for installing, using, and removing the work piece clamp.
How to extend and lock the table extensions for supporting long work pieces.
Guide on using the length stop for cutting multiple pieces of the same length.
Procedures for ensuring the saw is accurately calibrated for precise cuts.
Steps to align the saw blade perpendicular to the miter table.
Procedure for setting the blade at a 45° bevel and 0° miter angle accurately.
How to calibrate the bevel angle indicators for accurate readings.
Instructions for calibrating the miter angle indicators to show accurate readings.
Details on how to safely turn the saw on and off using the trigger and lock-off button.
Instructions for performing chop cuts, suitable for narrow work pieces.
Guidance on performing slide cuts, ideal for wide work pieces.
How to make miter cuts by setting the miter table to angles other than 0°.
Instructions for making cuts at angles other than 90° to the miter table.
Guidance for making cuts using both miter and bevel angles simultaneously.
Techniques for safely cutting warped or bowed material, ensuring proper orientation.
Steps for using the depth stop to create grooves or non-through cuts.
Instructions for cutting various types of base moldings using the miter saw.
Specific settings and procedures for accurately cutting USA crown molding.
Step-by-step guide for safely removing the saw blade.
Detailed instructions for correctly installing a new saw blade.
Guidance on lubricating key areas and cleaning the miter saw.
Recommendations for safely storing and transporting the miter saw.
Outlines the terms and conditions of the manufacturer's limited warranty.
