PART LIST
Carefully remove the miter saw from its
packaging and check that the following
parts are included (Fig. 1).
A 1pc Miter saw
B 1pc Dust bag
C 1pc Saw blade wrench for changing
blade (6 mm hex key)
D 1pc Work piece clamp
E 1pc Operator’s Manual
WARNING If any parts are damaged or missing, do not operate this saw until the
missing parts are replaced. Failure to heed this warning could result in serious personal
injury.
TOOLS NEEDED
The following tools (not included) are needed for making adjustments (Fig. 2):
1. 3mm Hex key
2. Philips screwdriver
3. Combination square
To Next Page
Loading...
