Master-force 240-0021 - Safety Symbols Guide; Operators Manual and Safety Alert; Personal Protection Symbols; Specific Hazard Symbols

Page 3
NOTE: Some of these following
symbols may be used on this tool. Please
study these and learn their meaning.
Proper interpretation of these symbols will
allow you to operate the tool better and
safer.
Symbol
Name
Designation / Explanation
Read the Operator’s
Manual.
To reduce the risk of injury, user must
read Operator’s Manual.
Hearing protection
Wear hearing protection to reduce the
risk of induced hearing loss.
Inhalation protection
Wear respiratory protection to reduce the
risk of inhalation of harmful dust.
Eye protection
Always wear safety goggles or safety
glasses with side shields and a full face
shield when operating this product.
Hand protection
Wear gloves for handling saw blades and
rough material (recommendation that
saw blades should be carried in a holder
wherever practicable).
Class II construction
Double insulated construction
Safety alert
Precautions that involve your safety.
Do not expose to rain.
Do not expose and operate the tool in
rain.
No hands symbol.
Failure to keep your hands away from
the blade will result in serious personal
injury.
Hot surface
To reduce the risk of injury or damage,
avoid contact with any hot surface.
Laser radiation
To reduce the risk of injury to your eye,
do not stare into the beam.
WARNING! To ensure safety and reliability, all repairs should be performed by an
authorized service center.
SAFETY SYMBOLS