8
Lowes.com/masterforge
®
ASSEMBLY INSTRUCTIONS
1. Install gas cylinder safety stop
Put the gas cylinder safety stop (V) into
the holes of the bottom panel (S), then
turn over the bottom panel (S) and insert
2 R pins (EE) into the small holes of gas
cylinder safety stop (V).
Hardware Used
R Pin x 2
EE
Hardware Used
R Pin x 1
EE
2. Install diagonal bar barrier
Put one end of diagonal bar barrier
(R) into the hole of bottom panel (S),
then turn over the bottom panel (S)
and insert R pin (EE) into the small
hole of diagonal bar barrier (R).
To Next Page
Loading...