To Next PageTo Next Page
Need help?Do you have a question about the master mechanic 151997 and is the answer not in the manual?
Wear eye protection conforming to standards to prevent eye damage from flying debris.
Use proper circuit protection for 120V AC operation to avoid hazards.
Ensure ventilation openings are clear to prevent battery/charger overheating and fire risk.
Follow all safety warnings and instructions to prevent injury or shock.
Recycle or dispose of batteries properly to preserve natural resources and protect the environment.
Instructions for safely charging the battery pack using the provided charger.
Steps to correctly install and remove the battery pack from the drill.
How to set the adjustable torque clutch for different screw sizes and materials.
How to select between high-speed and low-speed operation using the switch.
How to operate the drill using the variable-speed trigger switch for speed control.
Procedures for safely installing drill bits into the keyless chuck.
Steps to safely remove drill bits from the keyless chuck.
Using the built-in bubble levels for accurate horizontal and vertical drilling.
Techniques for drilling into various surfaces, including workpiece securing.
How to select the correct bit and drive screws using the torque clutch.
Detailed steps for safely removing the drill chuck.
Procedures to re-tighten a chuck that has become loose on the spindle.
General guidelines and warnings for tool maintenance and cleaning.
Information regarding the tool's lubrication for its lifespan.
General| Brand | master mechanic |
|---|---|
| Model | 151997 |
| Category | Cordless drill/driver |
| Language | English |
