Need help?Do you have a question about the Master Spas legacy whirlpool and is the answer not in the manual?
General| Voltage | 240V |
|---|---|
| Amperage | 50A |
| Shell Material | Acrylic |
| Pump | 2 |
| Insulation | Foam |
| Seating Capacity | 6-7 Adults |
Key safety precautions for installation and usage.
Continued safety precautions for installation and usage.
Considerations for spa placement and movement.
Guidance for installing spas below grade.
Requirements for a stable and level foundation.
Chemicals that kill germs and bacteria.
Water's ability to resist pH changes.
Measurement of water acidity or alkalinity.
Daily checks for sanitation and water levels.
Troubleshooting excessive odor from sanitizers.
Identifying and fixing causes of water odor.
Diagnosing and resolving cloudy spa water.
Addressing causes of spa-induced irritation.
Troubleshooting when the spa has no power or response.
Troubleshooting issues with the spa heater.
Diagnosing why spa pumps are not running.
Understanding and resolving GFCI breaker trips.
Identifying causes of reduced jet pressure.
Steps to prepare the spa for cold weather.
Electrical specifications for 120V, 15A setup.
Electrical specifications for 240V, 50A setup.
Steps for initial spa activation.
Understanding and responding to spa error codes.
Steps for spa initial start-up and priming.
Understanding Ready and Rest operating modes.
Common operational messages and their meanings.
Troubleshooting messages related to the spa heater.
Interpreting messages about sensor issues.
Checks for issues affecting water flow to the heater.
Other non-specific messages and communications issues.
Error messages related to the spa's system.
To Next Page