EasyManua.ls Logo

Master Spas LSX 900 - User Manual

Master Spas LSX 900
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MICHAEL PHELPS LEGEND SERIES OWNERS MANUAL

Questions and Answers

  • A
    Ana CoxAug 8, 2025
    What to do if Master Spas LSX 900 water is cloudy?
    • P
      parksjonathanAug 8, 2025
      Cloudy water in your Master Spas hot tub can stem from several causes. First, ensure that your filters are clean and that the filtration times are adequate. If the water chemistry is unbalanced, adjust the chemical levels accordingly. For suspended particles or organic materials, consider adding a spa clarifier, which you can source from your dealer. Lastly, if the water is old, replacing it might resolve the issue.
  • R
    Renee SheaAug 15, 2025
    How to get rid of chlorine smell in Master Spas LSX 900?
    • J
      Jimmy WilsonAug 15, 2025
      If your Master Spas hot tub has a strong chlorine or bromine odor, it could be due to excessive levels of these chemicals. To resolve this, shock the water with a non-chlorine shock treatment. Also, check the pH level and adjust it if necessary, as a low pH can contribute to the odor.
  • C
    Cindy OrtizAug 20, 2025
    What to do if I have eye or skin irritation from Master Spas LSX 900 Hot Tub?
    • H
      Hunter McdonaldAug 20, 2025
      Eye or skin irritation in your Master Spas hot tub is often due to unsanitary water. Shock the spa with a non-chlorine shock treatment to sanitize it. Also, ensure that the free chlorine level is below 5 ppm; if it's higher, allow it to drop. Poor sanitizer and pH levels can also cause irritation, so adjust them according to your spa test strip results.
  • K
    Kathy WebbAug 27, 2025
    Why does my Master Spas Hot Tub water smell bad?
    • F
      fnavarroAug 27, 2025
      A bad odor in your Master Spas hot tub water can be caused by several factors. You may have low levels of sanitizer, so shock the water with a non-chlorine shock treatment or adjust sanitizer levels. An out-of-range pH level can also cause odor, so adjust the pH level if necessary. Finally, bacteria or algae growth could be the culprit, requiring you to adjust the sanitizer levels.
  • C
    Colleen HallSep 1, 2025
    What to do for foaming in Master Spas LSX 900 Hot Tub?
    • E
      Erin ButlerSep 1, 2025
      If you notice foaming in your Master Spas hot tub, it's likely due to high levels of body oils, lotions, soap, etc. Adding a small amount of defoamer can help to reduce the foaming.

Summary

Safety Instructions

General Safety Warnings

Covers key precautions, instructions, and supervision requirements.

Electrical and Water Safety

Addresses GFCI, shock hazards, and safe water temperature limits.

Health Precautions

Covers user health considerations like pregnancy and medical conditions.

Glossary of Spa Terminology

Installation Requirements

Electrical Installation Requirements

Details wiring, power needs, and code compliance for electricians.

Installation Instructions

Step-by-step guide for physical assembly and initial setup.

Water Chemistry and Maintenance

Control Panel Operation

Main and Shortcut Screens

Overview of the primary interface and quick access functions.

Settings Menu and Modes

Details on configuring temperature, heat modes, and panel behavior.

Additional Settings and Features

Spa System Messages

Troubleshooting Guide

Common Operational Issues

Addresses no power, pump operation, and poor jet performance.

Heating and Electrical Issues

Troubleshoots spa not heating and GFCI tripping problems.

Regular Maintenance Procedures

Component Maintenance

Master Spas LSX 900 Specifications

General IconGeneral
Jets90
Voltage240V
Amperage50A
LightingLED
Ozone SystemYes
Shell MaterialAcrylic

Related product manuals