How to remove scum ring around Master Spas TS 7.25 Hot Tub?
A scum ring around your Master Spas Hot Tub is usually due to a build-up of oils, dirt, and organic elements. Wipe it off with a clean towel and add an enzyme product.
Why does my Master Spas TS 7.25 water smell like chlorine?
A chlorine or bromine odor in your Master Spas Hot Tub can be due to excessive chlorine or bromine levels, or low pH. To resolve this, shock the water with a non-chlorine shock treatment or adjust the pH if necessary.
What to do if Master Spas TS 7.25 Hot Tub water is cloudy?
If your Master Spas Hot Tub water is cloudy, it could be due to dirty filters or inadequate filtration, water chemistry imbalance, suspended particles or organic materials, or old water. You can clean the filters and adjust filtration times, adjust the chemistry levels, add spa clarifier, or change the spa water.
Why do I have eye and skin irritation from my Master Spas TS 7.25?
Eye or skin irritation in your Master Spas Hot Tub can stem from unsanitary water, a free chlorine level above 5 ppm, or poor sanitizer/pH levels. You can shock the spa with a non-chlorine shock, allow the chlorine level to drop below 5 ppm, or adjust the sanitizer/pH levels according to spa test strip results.
Why does my Master Spas TS 7.25 water have an odor?
A water odor in your Master Spas Hot Tub may be caused by low levels of sanitizer, pH out of range, or bacteria or algae growth. To address this, shock the water with a non-chlorine shock treatment, adjust sanitizer levels if needed, or adjust the pH level if necessary.
What causes foaming in my Master Spas Hot Tub?
Foaming in your Master Spas Hot Tub is often caused by high levels of body oils, lotions, soap, etc. Adding a small amount of defoamer can help reduce the foam.
Why does Master Spas Hot Tub water have a blue color or colorful deposits?
Deep blue water color or colorful deposits in your Master Spas Hot Tub may be due to excessive build-up in the water from total dissolved solids, bather load, and chemical treatments over time, or a reaction between substances in the water and types or excessive amounts of chemicals added to water. Draining and refilling the water may be required.
Describes the physical location of the spa's unique serial number for identification and registration purposes.
Instructions on how to register your spa online to ensure efficient customer service and warranty support.
Emphasizes the importance of reading and understanding safety aspects for a safe and enjoyable spa experience.
Outlines precautions for electrical connections, grounding, and cord safety to prevent shock hazards.
Details GFCI testing, child supervision, and suction fitting safety to prevent drowning and injury.
Advises on water temperature limits, medical conditions, and risks of hyperthermia for safe spa use.
Explains various types of suction entrapment hazards including hair, limb, body, evisceration, and mechanical entrapment.
Defines various spa jets like Therapy Jets, Neck Jets, Shoulder Jets, and diverter valves for water flow control.
Defines terms like Air Control Valve, Topside Control Panel, Personal Remote Control, and access panels.
Explains Spa Heater, Slice Valves, Main Therapy Pump, Secondary Therapy Pump, and Circulation Pump functions.
Lists factors for outdoor spa placement, landscaping, privacy, and access to utilities.
Outlines requirements for indoor spa installation, including ventilation, floor drains, and humidity resistance.
Provides guidance for partially or fully recessed spa installations, focusing on drainage and ventilation.
Details steps for positioning the spa, removing panels, filling with water, and initial power-up.
Explains how to bleed air from pumps, adjust water chemistry, and set up jets for optimal performance.
Highlights benefits of the EcoPur® Charge filtration system, including sanitizing properties and plumbing protection.
Defines terms like Parts per million (ppm), Total Alkalinity, pH, and Shocking for water maintenance.
Explains sanitizers (chlorine, bromine), total dissolved solids (TDS), and calcium hardness for spa water maintenance.
Discusses evaporation, heat, air, environment, and bathers as factors impacting spa water quality.
Provides steps for filling the spa, adding chemicals, and adjusting pH, alkalinity, and chlorine levels.
Outlines a schedule for checking water quality, adding chemicals, and cleaning filters for optimal spa conditions.
Offers guidance on addressing hazy water, using defoamers, and exclusively using spa-specific chemicals.
Lists common problems like odor, cloudy water, and foaming with their causes and recommended solutions.
Provides step-by-step instructions on how to drain the spa, including locating the drain and proper reassembly.
Details methods for cleaning the spa surface, caring for filter elements, and replacing them as needed.
Illustrates how to access different types of spa filters and provides care instructions for spa pillows.
Guides on cleaning spa jets and diverter valves to ensure smooth operation and prevent blockages.
Covers maintenance for the spa cover, cabinet, and the ozone system for longevity and performance.
Offers advice on cleaning and maintaining stainless steel parts to prevent corrosion and maintain appearance.
Addresses issues where the spa has no power or the pumps are not operating correctly, with diagnostic steps.
Provides solutions for spa heating problems and explains common causes and remedies for GFCI tripping.
Details the process for draining and preparing the spa for winter to prevent freeze damage.
Outlines crucial electrical connection details, including voltage, amperage, GFCI requirements, and wiring precautions.
Introduces the main screen of the Icon Spa Touch control panel, showing key status indicators and controls.
Explains the various icons displayed on the spa's main control screen, detailing their functions and meanings.
Provides detailed definitions for all icons on the main screen, including status, warnings, and system information.
Describes how to adjust the spa's set temperature and navigate through the control menu screens.
Details the Spa Screen, which allows users to control various equipment like jets and pumps.
Details how to set the spa's time-of-day, crucial for programming filter cycles and other features.
Details how to control individual spa equipment like jets and pumps, including different speed states.
Explains increment/decrement functions and the Invert screen option for the spa control panel.
Describes how to exit different control screens, save or cancel changes, and the function of the Back button.
Explains how to navigate between different screens using page right/left and page up/down functions.
Details the Settings screen for programming spa behaviors and managing dual temperature ranges (High/Low).
Explains the difference between Ready and Rest heat modes, including polling and 24hr circulation behavior.
Guides on filling the spa and the initial Priming Mode process for pumps and heater startup.
Describes pump operation modes (Non-Circ, Circulation) and how filtration and ozone systems function.
Explains freeze protection mechanisms and the optional cleanup cycle for maintaining spa hygiene.
Details how to set the spa's time-of-day, crucial for programming filter cycles and other features.
Guides on setting main and optional second filter cycles, including start times and durations.
Explains the purpose of purge cycles at the start of each filter cycle for sanitary conditions and freeze protection.
Describes how to lock the spa control panel or settings to prevent unauthorized adjustments or usage.
Explains the Hold Mode function used to disable pumps during maintenance or service activities.
Details how to configure the cleanup cycle duration and change the display language on the control panel.
Provides details on accessing and viewing system information like model, software version, and configuration.
Explains the GFCI Test feature for verifying the proper function of the Ground Fault Circuit Interrupter.
Lists common general messages and alerts that may appear on the spa control screen.
Details error messages related to the heater, such as low flow, dry heater, or overheating conditions.
Covers sensor faults and miscellaneous error messages like communication errors that may require service.
Lists system-related error messages such as program memory failure, clock failure, or configuration errors.
Explains reminder messages for routine maintenance tasks like checking pH, sanitizer, and filters.
Details reminder messages for cleaning covers, changing filters, and maintaining the UV system.
Covers reminder messages for wood treatment, UV system replacement, and ozone system checks.
Introduces the Fusion Touch Sound system, warning about prolonged exposure to high temperatures.
Provides step-by-step instructions for connecting a mobile device via Bluetooth to the spa's audio system.
Details the procedure for removing and replacing the UV lamp in the Mast3rPur system, emphasizing safety precautions.
Guides on installing the new UV lamp and cleaning the quartz tube for optimal system performance.
Covers the final steps of quartz tube installation and general maintenance recommendations for the Mast3rPur system.
General| Control System | Balboa |
|---|---|
| Lighting | LED |
| Water Features | Waterfall |
| Voltage | 240V |
| Amperage | 50A |
| Shell Material | Acrylic |
| Cabinet Material | Synthetic |
| Insulation | Foam |
| Pump | 2 |
To Next Page