To Next PageTo Next PageWhat to do if the heating elements are hot, but the motor of my Master B 18 EPR isn't working?
If the heating elements in your Master Heater are hot but the motor isn't operating, the motor itself may be damaged and need replacement. Alternatively, the fan might be stopped; try unlocking or cleaning it. Lastly, the switch could be damaged, requiring replacement.
Why is my Master B 18 EPR's motor running, but it's not heating?
If the motor in your Master Heater is running but no heat is being produced, it could be due to several reasons: the thermal circuit breaker may be active, the thermostat could be damaged, the contactor might be damaged (for 400 V models), or the heating element itself may be damaged. To resolve this: * First, let the heater cool down, then push the "RESET" button. * If that doesn't work, the thermostat, contactor, or heating element may need to be replaced.
Essential safety guidelines, warnings, and precautions for operating the heater.
Steps for unpacking, identifying components, and turning the appliance on/off.
Guidance on using accessories like the hot air hose and external thermostat.
Information on thermal reset, storage, and periodic functional inspections.
Schematic diagram illustrating the electrical connections of the heater.
Guidelines for the proper disposal of waste electrical and electronic equipment.
General
