Disconnect bender from outlet while not in use and before
cleaning,adjusting or servicing.Do not disconnect plug from outlet by
pulling the cord.Always check that the switch lock is OFF before
plugging in.
BEWARE OF ENVIRONMENT
Do not use bender in the presence of flammable materials(e.g.
paint,thinner, petroleum products ,adhesives).
Do not use bender in a possibly lighted and clear of
obstructions.Operator should at all times have an unobstructed view
of the cutter,rebar and surrounding area.
WEAR PROPER APPAREL
Do not wear loose clothes,dangling objects or jewellery.Restrain
long hair. The use of a safety-helmet and rubber soled boots is
recommended.If safety gloves are worn,be especially careful that
gloves does not get caught in moving parts
KEEP VISITORS AWAY
Keep all visitors at a safe distance from the work area for their own
protection And to prevent distraction of the operator.
To Next Page
Loading...
Need help?
General
