Master RB16 - Product Information and Storage; Parts and Technical Specifications; Storage Guidelines

5
MAINTAIN BENDER WITH CARE
Inspect bender before each application.Keep handle dry,clean and free
from oil and/or grease.Keep housing and piston free of dirt and iron
filings.Check that no screws or bolts are loose or missing.Following
instructions for maintenance.Inspect switch,cord,Plug and any
extension cable at regular intervals.
STORE CAREFULLY
When not in use,store bender and accessories in a dry place where
they can’t be accessed by unauthorized persons.
PARTS AND SPECIFICATIONS OF NRB-32
1.Handl
e
2.Switc
h
3.Mode control
lever 4.Oil plug
5.Front
handle
6.Hook
7.Roller
8. Housing
9. Motor