7
• Valve must be in OFF position.
• Remove safety cap on drain valve.
• Screw valve spout attachment onto drain valve. Do not
oovertighten. This could damage threads and cause leakage.
IIIf spout becomes snug in the up position turn
ccounterclockwise until it is in the down position.
• Align spout over container with opening facing downward.
OOpen valve to drain.
• Close valve when complete.
• Do NOT store water in appliance.
HOW TO STEAM USING APPLIANCE
CAVITIES
DRAIN VALVE
•
Add water to Max Fill Line. Do not add water past this line. Do
nnot allow water to completely evaporate. This will cause element
ttto overheat and damage the unit. Make sure basket is in place,
aas shown on left, to steam.
• Water will boil at 212
°F (100 °C)
. When steaming or boiling
turn dial to 375
°F (191 °C)
to ensure unit will not cycle and
water will continue boiling.
• Cavities in unit are designed to catch grease and
condensation from steam. Wipe out cavities using
damp cloth after each use.
• When steaming, cavities may become full before
finished cooking, drain with sponge or other
absorbent material. Caution! Water will be hot.
ELEMENT
MAX FILL
LINE
VALVE
SPOUT
DRAIN
VALVE
CAVITIES
To Next Page
Loading...
