12 www.mastercool.com
Pressing NEXT on the bottom of the screen will display last and total refrigerant recovered and the
refrigerant charge.
The values on the left side of the screen will display the last amount of recovered refrigerant and
refrigerant charged. The values on the right side of the screen display the lifetime totals of recovered
refrigerant and refrigerant charged.
• SETTINGS: This will allow the user to customize the time/date, language, units and printer of the
COMMANDER machine
o TIME/DATE: To set the time and date press the corresponding up or down arrows. Press
update to lock in the selection
o LANGUAGE: Choose from one of the 18 languages programmed into the machine. Press the
circle next to the language desired. Select update to lock in the selection
To Next Page
Loading...