EasyManua.ls Logo

MasterCool MMB10 User Manual

MasterCool MMB10
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Av. Carr. Miguel Alemán #6061, Col. América, Cd. Guadalupe, Nuevo León, México, C.P. 67130
www.Impco.com.mx (81)-8144-5440
AP059719 2/2008
1450 E. Grant Street, Phoenix, Arizona U.S.A.
www.AdobeAir.com 602-257-0060
Owner’s Manual
Manual de Operación
PRECAUCIO
´
N
LEA Y CONSERVE ESTE MANUAL
Lea todas las instrucciones cuidadosamente antes
de montar y operar esta unidad. Este manual fue
diseñado para proveerle importante información
necesaria para instalar
, operar
, mantener y detectar
problemas en su enfriador. La falla en seguir estas
instrucciones puede dañar y/o afectar la operación
del enfriador y anular la garantía.
U.S. Models:
MMB10, MMB12, MMB14 & MMPC12
Mexico Modelos:
MMB10, MMB12 & MMB14
CAUTION
SAVE AND READ THESE
IMPORTANT INSTRUCTIONS
Read all instructions carefully before setting up and
operating this unit. This manual was designed to pro-
vide you with important information needed to setup,
operate, maintain, and trouble-shoot your cooler.
Failure to follow these instructions may damage
and/or impair its operation and void the warranty.
Question and Answer IconNeed help?

Do you have a question about the MasterCool MMB10 and is the answer not in the manual?

MasterCool MMB10 Specifications

General IconGeneral
BrandMasterCool
ModelMMB10
CategoryAir Conditioner
LanguageEnglish

Summary

Introduction

Warnings and Safety Rules

Assembly Instructions

Initial Component Installation

Instructions for installing grilles, casters, plastic tray, drain bushing, and float valve.

Water and Power Connections

Guidance on connecting to water supply, adjusting water level, and connecting power.

Belt Tension Check

Procedure for checking and adjusting belt tension on specific models.

Location

Use and Operation

Pad Drying Procedure

Drying pads after operation by turning off the pump before the fan.

Sump Draining and Cleaning

Draining the water sump weekly and cleaning the water pump.

Lubrication Requirements

Periodic lubrication of blower shaft bearings for belt-drive models.

Electrical Information

Cooling Pad Replacement

Specifications and Dimensions

Troubleshooting

Warranty Information

Warranty Coverage and Exclusions

Details on 1-year coverage, what is not covered, and warranty limitations.

Obtaining Service Under Warranty

Procedure for contacting dealers or customer service for warranty claims.

Related product manuals