To Next PageTo Next Page
Need help?Do you have a question about the MasterCool MMB12 and is the answer not in the manual?
General| Brand | MasterCool |
|---|---|
| Model | MMB12 |
| Category | Air Conditioner |
| Language | English |
Instructions for installing the cooler grille using screws and lock washers.
How to attach the wheels (casters) to the cooler cabinet bottom.
Steps for attaching the tray top using push rivets after removing pad frames.
Installing the drain bushing and plug through the cooler's bottom hole.
Attaching the float valve and garden hose adapter to the cooler's side leg.
Connecting a garden hose to the float valve for water supply.
How to set the water height by adjusting the float.
Plugging the unit into a grounded GFCI protected electrical power supply.
Checking and adjusting belt tension on belt drive models.
Procedure to dry cooling pads after operation for best results.
Weekly draining of the sump to reduce mineral build-up.
Lubrication needs for blower shaft bearings on belt-driven models.
Instructions for disassembling and cleaning the water pump.
Procedure for replacing cooling pads, recommended every two years.
Table detailing model specifications, dimensions, water capacity, and motor HP.
Troubleshooting steps for units that do not start or provide airflow.
Diagnosing and resolving issues with insufficient air delivery from the unit.
Addressing problems related to water draining from the cooler unit.
Solutions for musty or unpleasant odors emanating from the cooler.
Identifying and fixing noises like knocking, shaking, or rattling.
Resolving issues with water droplets present in the discharged air stream.
Details on the one-year coverage for components and accessories.
Items and conditions not covered by the limited warranty.
Warning against using unauthorized cleaners or additives.
Instructions on how to contact for warranty service and support.
