5
IMPORTANT SAFETY WARNINGS
DANGER!
High temperatures may be generated under certain abnormal conditions. Do not partially or fully cover or obstruct
the front of this heater.
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot; fully insert.
15. To prevent overload and blown fuses, be sure that no other appliance is plugged into
the same outlet (receptacle) or into another outlet (receptacle) wired into the same
circuit.
16. It is normal for the heater’s plug and cord to feel warm to the touch. A plug or cord
which becomes hot to the touch or becomes distorted in shape may be a result of a
worn electrical outlet. Worn outlets or receptacles should be replaced prior to further
use of the heater. Plugging heater into a worn outlet/receptacle may result in
overheating of the power cord or fire.
17. Ensure the heater is on a stable, secure surface to eliminate the potential of tipping
it over.
18. Always plug heaters directly into a wall outlet/receptacle. Never use with an
extension cord or relocatable power tap (outlet/power strip).
19. Be sure that the plug is fully inserted into appropriate receptacle. Please remember
that receptacles also deteriorate due to aging and continuous use: check
periodically for signs of overheating or deformations evidenced by the plug. Do not
use the receptacle and call your electrician.
20. Check that neither the appliance nor the power cable has been damaged in any way
during transportation.
21. Make sure that no pieces of polystyrene or other packaging material have been left
between elements of the appliance. It may be necessary to pass over the appliance
with a vacuum cleaner.
22. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
23. Do not use this heater in the immediate surroundings of a bath, a shower or a
swimming pool.
24. The heater must not be located immediately below a socket-outlet.
25. Do not use this heater with a programmer, timer or any other device that switches
the heater on automatically, since a fire risk exists if the heater is covered or
positioned incorrectly.
26. In order to avoid overheating, do not cover the heater.
To Next Page
Loading...
Need help?
General