PROTECTION SYSTEMSCLEANING AND MAINTENANCE
7
CAUTION:
DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE HEATER AS THIS COULD CREATE A FIRE OR
ELECTRIC SHOCK HAZARD.
CLEANING AND MAINTENANCE
1. Before any cleaning, make sure that:
a. The power setting is turned to OFF.
b. The power supply is disconnected at source by removing plug from power
outlet.
2. Cleaning:
a. Interior dust can often be removed by using a vacuum cleaner with a crevice
tool attachment.
b. Do not use cleaning liquid or other chemicals to spray on the unit.
c. To clean enclosure, use a clean, soft and lightly-damp cloth to gently wipe off
the dirt from the surface of the unit. Be sure not to wet the heating element
or the switches. Allow the unit to dry completely before using it.
3. Any other servicing should be performed by an authorized service representative.
PROTECTION SYSTEMS
POWER LIGHT:
This fan heater is equipped with a power light, which glows whenever the heater is
plugged in and turned on. It will continue to glow even if the thermostat has cycled the
heating elements off. This feature is to prevent you from being unaware that the heater is
operating and maintaining the temperature of the room. When you do not wish the heater
to control the room temperature, turn the control switch to OFF and remove the plug from
the electrical outlet.
THERMAL FUSE:
When the unit reaches extremely high temperatures, the heater’s thermal fuse will shut
off the heater permanently. If this occurs, turn the heater off, unplug it, and call the agent
for service.
To Next Page
Loading...
Need help?
General