model no. 043-6145-8 | contact us 1-800-689-9928
OPERATING INSTRUCTIONS
6
OPERATING INSTRUCTIONS
Be sure to plug into a 120 V AC, 60 Hz outlet and ensure that the plug and the socket fit
well. Then you can operate the appliance.
POWER SETTING CONTROL:
THIS MODEL IS EQUIPPED WITH A 4-POSITION POWER SETTING SWITCH.
Set the power and setting control switch to the high heat setting for fast warm-up of a
room. Once the room is comfortable, select a lower power setting to prevent the room
from becoming too warm.
TEMPERATURE SETTING (THERMOSTAT):
Adjust the thermostat to maximum and select the desired power setting. Once the room
is comfortable, rotate the thermostat counter-clockwise, until the heater shuts off. The
thermostat will now maintain the temperature by cycling the heater on and off.
During particularly cold weather, the low power setting may be insufficient to satisfy the
thermostat. Select a higher setting for these periods. For fan only operation, select the
fan position on the control switch. Set the thermostat to maximum.
Symbol Function
Power off
Only fan operating (15 W)
Low heat setting (900 W)
High heat setting (1,500 W)