MasterCraft 054-0277-4 - Operating Instructions; Check Before Starting

model no. 054-0277-4 | contact us 1-800-689-9928
6
OPERATING INSTRUCTIONS
Check before starting the device!
DANGER! RISK OF INJURY!
The device may only be put into operation if there are no defects. If a part is defective,
it must be replaced before the device is used again.
Check to make sure the device is in a safe operating condition:
-Check to make sure there are no visible defects.
-Check to make sure all device components are correctly mounted.
Mastercraft Drill Bit Sharpener
1. Adjusting Knob
2. Drill holder
3. On/Off switch
1
2
3