What to do if my MasterCraft 054-0370-0 motor runs but the chain doesn't cut?
If your MasterCraft Pole Saw's motor runs and the chain rotates but doesn't cut, it could be due to a dull chain. Try replacing or sharpening the chain. Another possibility is that the chain is on backwards; in this case, reinstall the chain to reverse its direction.
How to fix MasterCraft Pole Saw when motor runs but the chain doesn't rotate?
If the motor of your MasterCraft Pole Saw runs, but the chain does not rotate, it could be because the chain doesn't engage the drive sprocket. Try reinstalling the chain, making sure that the drive links on the chain are fully seated on the sprocket. Alternatively, the chain tension might be too tight, so try re-tensioning the chain.
Follow basic safety precautions for electric gardening appliances.
Use only specified Mastercraft batteries and chargers to avoid shock or damage.
Guide to performing basic cutting operations with the pole saw.
Techniques and precautions for trimming branches and limbs.
Instructions on how to turn the pole saw on and off.
Guide on how to sharpen the saw chain cutters.
General| Corded/Cordless | Corded |
|---|---|
| Power Source | Electric |
| Voltage | 120V |
| Bar Length | 10 inches |
| Chain Pitch | 3/8 inch |
| Chain Gauge | 0.050 in |
| Power | 8 Amp |
To Next Page