BATTERY PACK REMOVAL AND
PREPARATION FOR RECYCLING
To preserve our natural resources, please
recycle or dispose of batteries properly.
This product contains lithium-ion batteries.
Never dispose of lithium-ion batteries in
normal household garbage or in landfill
sites as they will add to the pollution of the
environment.
Consult the local waste authority for
information regarding available recycling
and disposal options.
BATTERY PACK REMOVAL AND
PREPARATION FOR RECYCLING
WARNING: Upon removal of the
battery, cover the terminals of the
battery with electrical or heavy-duty
adhesive tape. Never touch both
terminals with metal objects or body
parts as a short circuit may result. Keep
away from children. Do not attempt to
destroy or disassemble battery or
remove any of its components. Lithium-
ion batteries must be recycled or
disposed of properly. Failure to comply
with these warnings could result in fire
and serious injury.
BATTERY MAINTENANCE
For power, long operational life and light
weight, this tool is powered by a lithium-ion
battery.
These lithium-ion batteries are powerful,
rugged and will provide hundreds of
charge/discharge cycles if properly
maintained.
NOTE: Never remove the battery in order to
use it for any other purpose. This will void
the warranty.
How to care for the lithium-ion battery
1. Do not use the cordless screwdriver
at temperatures below –10° C (14°F).
2. Never allow a battery to freeze.
3. Do not charge a battery that has been
stored at or below 0° C (32°F) or
above 40°C (104° F). Allow it to sit at
room temperature for at least 30
minutes before charging.
4. Do not charge the battery if the tool
seems warm to the touch.
5. To protect the battery this tool is
equipped with a battery monitor
circuit. When the battery voltage
reaches the minimum manufacturer’s
recommended voltage, it interrupts
the power to the tool, signalling that
the battery should be charged.
6. The battery monitoring circuit shuts
down at temperatures below -15° C
(5° F) to protect the battery.
7. At very low temperatures battery
output is severely reduced. However,
it is safe to use the tool, as its output
will increase to normal levels due to
self-generated heat.
To Next Page
Loading...
Need help?
General
