Edge guide
Unpacking
WARNING!
NEVER have the router connected to the power source when assembling parts, making
adjustments, installing or removing collets or cutter bits, during cleaning, or when it is
not in use. Disconnecting the router will prevent accidental start-ups, which could cause
serious personal injury.
When unpacking the box, don’t discard any packing materials until all of the contents are accounted for:
1. Carefully lift the Router Motor and Fixed Base with the 1/2" collet already installed out of the
carton, and place it on a stable, flat surface.
2. Open the parts bag to locate the following:
• Vacuum adaptor and 2 Screws used to attach the adaptor to the base
• Chip Guard
• 1/4" Collet Sleeve
• Edge Guide
• Wrench
3. Carefully inspect the items to ensure that no breakage or damage has occurred during shipping. If
any of the items in the parts list is missing, call the Toll-free Helpline – 1-800-689-9928.
WARNING!
If any parts are broken or missing, do not attempt to plug in the power cord or operate the
router until the broken or missing parts are replaced. Failure to heed this warning could
result in serious injury.
SAFETY GUIDELINES
SAFETY GUIDELINES
To Next Page
Loading...
Need help?
General
